Hi, Inland Empire!
Casa Clay Roofing: Tile Roof Cost, Inland Empire
Friendly, sourced answers on tile roof costs in the Inland Empire: price ranges, what changes them, and how to get a fair bid from a licensed roofer.
What does my roof need?See prices
Checked
Every price
has a source
30-second check
What does my roof need?
Pick the one that sounds most like your roof. It is a starting point, not a diagnosis.
You are probably pricing
Tile repair
Broken pieces can usually be swapped one by one. Ask the roofer to match the profile and color, and to check the underlayment while the tiles are off.
You are probably pricing
Lift and re-lay
When the tiles are sound, the layer under them is the usual suspect. A lift and re-lay keeps your tiles and replaces what is underneath.
You are probably pricing
Full replacement
New tile over new underlayment, battens and flashing. This is the biggest scope, so get every line written out.
You are probably pricing
Start with an inspection
A roofer can lift a few tiles and show you what they find. That tells you which of the three jobs you are pricing.
Prices
Tile roof costs in Inland Empire
Clay tile, new roof
- What it costs
- $8 to $22 per sq ft installed
- How long it lasts
- About 100 years
- Good to know
- Usually the pricier tile
- Source
- This Old House, Apr 2026
Concrete tile, new roof
- What it costs
- $7 to $19 per sq ft installed
- How long it lasts
- Up to about 50 years
- Good to know
- Heavy, so ask about the frame
- Source
- This Old House, Apr 2026
New underlayment, same tiles
- What it costs
- $0.50 to $2 per sq ft for the layer itself
- How long it lasts
- About 10 years
- Good to know
- Labor to lift and reset tile is extra
- Source
- Fixr, Jan 2025
Fix a cracked tile or a leak
- What it costs
- $25 to $50 per tile, $150 to $500 per leak
- How long it lasts
- Depends on the cause
- Good to know
- Find the source first
- Source
- Fixr, Jan 2025
See it all as one table
| Roof job | What it costs | How long it lasts | Good to know | Source |
|---|---|---|---|---|
| Clay tile, new roof | $8 to $22 per sq ft installed | About 100 years | Usually the pricier tile | This Old House, Apr 2026 |
| Concrete tile, new roof | $7 to $19 per sq ft installed | Up to about 50 years | Heavy, so ask about the frame | This Old House, Apr 2026 |
| New underlayment, same tiles | $0.50 to $2 per sq ft for the layer itself | About 10 years | Labor to lift and reset tile is extra | Fixr, Jan 2025 |
| Fix a cracked tile or a leak | $25 to $50 per tile, $150 to $500 per leak | Depends on the cause | Find the source first | Fixr, Jan 2025 |
The short answer: a typical full tile roof runs about $8,200 to $24,600, averaging near $16,000 (This Old House, April 2026). One guide puts a 1,500 square foot roof at $19,000 to $35,000 (Fixr, January 2025). These are national estimates. No trustworthy price list exists just for the Inland Empire, so nothing here is a local quote.
Welcome. If a tile roof is on your mind, take a breath. Often the tile is fine and the layer underneath is what is tired. Other times a few broken pieces are the whole story.
Start with the 30-second check above. Then open the full cost guide for clay vs concrete, repairs, permits, heat rules, fire zones and how to compare bids. You can also look at our roof photos to match what you see on your roof.
We are a homeowner guide, not a roofer. We do not give quotes or send crews. When you are ready for real numbers, get written bids from licensed roofers and check each license at cslb.ca.gov.
Swipe through
Why prices go up or down
Tile jobs
Six jobs, explained simply
Full tile replacement
New tile on new underlayment, top to bottom.
Lift and re-lay
Keep the good tiles, swap the worn layer under them.
Tile repair
Fix the cracked or slipped pieces.
Ridge and hip
Re-set the ridge line and its flashing.
Flashing and valleys
Seal the spots where leaks love to start.
Roof check-up
A careful look before you buy, sell or claim.
Job photos are examples from open photo libraries, not our work. Photo credits
Questions
You asked, we answered
Quick answers to what neighbors ask most.
Does summer heat matter for my roof?
Yes. Heat is hard on underlayment and sealants, and California's energy code can affect which roofing products are allowed when more than half a roof is replaced.
Can I keep my tiles?
Often you can. If most tiles are in good shape, a roofer can lift them, put down new underlayment and set them back. Ask for the replacement tiles to be counted in the bid.
How do I know a roofer is licensed?
Look the name or license number up at cslb.ca.gov. It is free and takes about a minute.
Are these prices for my city?
They are national estimates from published guides, each with its source and date. Only a written bid from a licensed roofer gives your real price.
Around Inland Empire
Find your city
Bright blue cities have their own guide. More are on the way.
- Riverside
- San Bernardino
- Rancho Cucamonga
- Fontana
- Moreno Valley
- Ontario
- Corona
- Menifee
- Temecula
- Murrieta
- Hemet
- Jurupa Valley
- Upland
- Chino
- Rialto
- Redlands
- Chino Hills
- Lake Elsinore
- Perris
- Yucaipa
- San Antonio Heights
- El Sobrante
- Woodcrest
- Lake Mathews
- Temescal Valley
- Canyon Lake
- French Valley
Ready for a real number?
Ask a licensed roofer to measure your roof and write every line out: tile, underlayment, flashing and permit. Send us a quick request and we hand it to a licensed roofer near you.